Slide Mounting Media
Electron Microscopy Sciences Graphite Spray Adhesive 450 GR
An easy to use graphite spray to coat small samples. It is fast drying and produces a very flat, thin, and uniform graphite film. Its service temperature is up to 204 degree C. It's electrical resistance is 1.2 kohm/sq" at 1 ml thickness.
Electron Microscopy Sciences Conductive Silver Pen
This pen is designed for making instant conductive silver traces. It is ideal for applying samples to SEM stubs. A unique valve tip allows for very smooth flow withnormal writing pressure and it is spring loaded to prevent clogging. For conductivity traces, solderable termination's are possible using a 250 degree F cure for 15-20 minutes. Tin, lead, or silver solder can be used (Do not exceed 350 degree F for more than 5 seconds).
Each pen is filled with approximately 100 feet of traces. Silver content: 39-45% with less than 10 micron diameter. The thinner used for this pen is Butyl Acetate.
Electron Microscopy Sciences Embed 812 Resin 450 ML
EMbed 812 has the same characteristics as Epon 812, physically, and provides the same results in preservation, handling, curing and sectioning. EMbed 812 may cause etching on selected plastics. All formulas for mixing and using Epon 812 can be applied to EMbed 812, e.g. Luft's procedure, Mollenhauer's and EPON-ARALDITE mixtures.
Vector Laboratories VECTASHIELD® HardSet™ Antifade Mounting Medium With Phalloidin 10 ml
VECTASHIELD®HardSet™ Mounting Medium prevents rapid photobleaching of fluorescent proteins and dyes. After approximately 15 minutes at room temperature, the mounting medium will harden, the coverslip will become immobilized, and optimal antifade ability and refractive index of 1.46 will be achieved. Mounted slides should be stored at 4 degrees C, protected from light. VECTASHIELD HardSet Mounting Medium is compatible with a wide array of fluorochromes, enzymatic substrates, and fluorescent proteins. The refractive index is 1.45. This formulation of VECTASHIELD HardSet Mounting Medium contains TRITC-phalloidin. Fluorescent derivatives of phalloidin are used to stain actin filaments. TRITC (tetramethylrhodamine) is excited at 544 nm and emits at 572 nm, producing an orange-red fluorescence.
Electron Microscopy Sciences Citifluor™ Mountant Solution CFM-2, Glycerol Based, Non Hardening 25 ML
Citifluor mounting medium for immunofluorescence is designed to reduce the fading of the fluorescence of dyes used for labeling biological specimens. In the technique of fluorescence microscopy, the fluorescence is stimulated by high intensity UV and/or visible light. Absorption of the light populates an excited state of the dye (usually a singlet state) and this leads to fluorescence. However, the excited state of the dye may undergo chemical reaction, which leads to destruction as evidenced by the fading of the fluorescence and consequent loss of the image. Glycerol-tris amine buffered solution with a refractive index of ~1.52. pH 8.5.
Material: Glycerol Based
Type: Non Hardening
Electron Microscopy Sciences EMS Glycerol Mounting Medium w/ DABCO 100 ML
EMS Glycerol with anti-fading agent 1, 4-Diazobicyclo-(2,2,2-octane (DABCO) is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa fluoro 488, Alexa fluoro 594, Green fluorescent protein (GFP), tetramethyly rhodamine, Redox. Fluorescence is retained during prolonged storage at 4 degree C in the dark. Not recommended for phycoethyrin (PE), phycocyanin (PC) and allophycocyanin (APC).
Application: Immunofluorescence, confocal microscopy.
Reagent: Ready to use mounting medium with anti-fading agent.
Aat Bioquest FluoroQuest Mounting Medium with DAPI (50 mL)
FluoroQuest with DAPI is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This catalog is for 50 mL.
Cell Signaling Technology ProLong Gold Antifade Reagent with DAPI 10 ml
ProLong Gold Antifade Reagent with DAPI 10 ml
Sigma Aldrich Fine Chemicals Biosciences Eukitt Quick-Hardening Mounting Medium | 25608-33-7 | MFCD00145620 | 100ml
Eukitt Quick-Hardening Mounting Medium | 25608-33-7 | MFCD00145620 | 100ml
Electron Microscopy Sciences Citifluor™ Mountant Solution AF300, Glycerol Based, Hardening 10 ML
Citifluor mounting medium for immunofluorescence is designed to reduce the fading of the fluorescence of dyes used for labeling biological specimens. In the technique of fluorescence microscopy, the fluorescence is stimulated by high intensity UV and/or visible light. Absorption of the light populates an excited state of the dye (usually a singlet state) and this leads to fluorescence. However, the excited state of the dye may undergo chemical reaction, which leads to destruction as evidenced by the fading of the fluorescence and consequent loss of the image. Glycerol solution containing a phenolic type of antifadent.
Material: Glycerol Based
Type: Hardening
Electron Microscopy Sciences EMS Glycerol Mounting Medium w/ DAPI & DABCO 20 ML
EMS Glycerol with DAPI and DABCO is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. It prevents rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa fluoro 488, Alexa fluoro 594, Green fluorescent protein (GFP), tetramethyly rhodamine, Redox. Fluorescence is retained during prolonged storage at 4 deg C in the dark.
This mounting medium is fortified with DAPI which is a counter-stain for DNA. This product is to be used in situ hybridization techniques or other methods where fluorescence of DNA staining is required. DAPI excites at 360nm and emits at 460nm, producing a blue fluorescence. RNA is also stained with DAPI.
Not recommended for phycoethyrin (PE), phycocyanin (PC) and allophycocyanin (APC).
Reagent: Ready to use mounting medium with anti-fading agent
Refractive Index: 1.4617
Electron Microscopy Sciences EMS Glycerol Mounting Medium w/ DAPI & DABCO 100 ML
EMS Glycerol with DAPI and DABCO is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. It prevents rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa fluoro 488, Alexa fluoro 594, Green fluorescent protein (GFP), tetramethyly rhodamine, Redox. Fluorescence is retained during prolonged storage at 4 deg C in the dark.
This mounting medium is fortified with DAPI which is a counter-stain for DNA. This product is to be used in situ hybridization techniques or other methods where fluorescence of DNA staining is required. DAPI excites at 360nm and emits at 460nm, producing a blue fluorescence. RNA is also stained with DAPI.
Not recommended for phycoethyrin (PE), phycocyanin (PC) and allophycocyanin (APC).
Reagent: Ready to use mounting medium with anti-fading agent
Refractive Index: 1.4617